top of page
Features & Applications:
1. Micro load cell, low profile, small deformation;
2. Stainless steel material;
3. Tension and compression two directions, high dynamic response frequency;
4. Anti-overload;
5. It is mainly used in push-pull force meter, injection and mould industry, robot grasping, pressing, tension and compression detection and control, automobile assembly force measurements, etc.
Technical Parameter
Specifications | Technique |
Capacity | 0.5,1,2,3,5,10,20,30,50,100kN |
Rated output | 1.5±10%mV/V |
Zero balance | ±2% F.S. |
Non-linearity | 0.1%F.S. |
Hysteresis | 0.1%F.S. |
Repeatability | 0.05%F.S. |
Temp.effect on output | 0.05%F.S./10℃ |
Temp.effect on zero | 0.05%F.S./10℃ |
Input impedance | 780±10Ω |
Output impedance | 700±5Ω |
Insulation | ≥5000MΩ/100VDC |
Recommended excitation | 5~15V |
Maximum excitation | 20V |
Compensated temp range | -10~60℃ |
Operation temp range | -20~80℃ |
Safe overload | 150%F.S. |
Ultimate overload | 300%F.S. |
Cable size | Φ4×3000mm |
Related Products
Message
bottom of page