top of page
Features & Applications:
1. Micro load cell, low profile, small deformation;
2. Stainless steel material;
3. Tension and compression two directions, high dynamic response frequency;
4. Anti-overload;
5. It is mainly used in push-pull force meter, injection and mould industry, robot grasping, pressing, tension and compression detection and control, automobile assembly force measurements, etc.
Technical Parameter
Specifications | Technique |
Capacity | 5,10,20,50,100,200,250,500,1000,2000,3000,5000kg |
Rated output | 2.0±2.5%mV/V |
Zero balance | 0.02mV/V |
Non-linearity | 0.03%F.S. |
Hysteresis | 0.03% F.S. |
Repeatability | 0.03%F.S. |
Creep(30min) | 0.03%F.S. |
Temp.effect on output | 0.02%F.S./10℃ |
Temp.effect on zero | 0.02%F.S./10℃ |
Input impedance | 385±50Ω |
Output impedance | 350±10Ω |
Insulation | ≥5000MΩ/100VDC |
Recommended excitation | 5~15V |
Maximum excitation | 20V |
Compensated temp range | -10~40℃ |
Operation temp range | -20~70℃ |
Safe overload | 150%F.S. |
Ultimate overload | 200%F.S. |
Cable size | Φ5×3000mm |
Material | Aluminum 5~500kg, Alloy steel 1~5t |
Related Products
Message
bottom of page